Filter
Top Products
9
Hardware and Software Requirements
Computer
Windows XP or Windows 7 as OS
Internet Explorer Version 6.0-8.0
CPU: Intel Pentium IV X2 2.4 GHz or equivalent AMD
Memory: 1G or above
Display adapter
Support DirectX9 for example
NVIDIA GeForce 6 Series above
ATI Mobility Radeon 9500 above.
Power Supply
This camera requires a DC12V / AC24V / PoE power supply. Please make sure
you use the correct power supply before connecting to the camera.
Network Connector
Please use the RJ45 network connector for connecting the camera to your
computer or switch.
Switch
If you want to monitor several cameras, the switch is required.
Caution
To avoid damage to the camera, never connect more than
one type of power supply (PoE IEEE802.3 Ethernet Class 0
or DC12V or AC24V power plug) at the same time. If using
PoE, this camera is to be connected only to PoE networks
without routing to external equipments.
Connecting the Camera to a Personal Computer
Setting IP
This is a network-based camera and must be assigned an IP address first.
The camera’s default IP address is 192.168.0.2 and sub mask is
255.255.255.0. To change IP address, open Network Settings page described
later.
If your network uses a DHCP server, an IP address can be assigned
automatically from the DHCP server by enabling DHCP in the Network
Settings page described later.
Connecting the Camera to a Personal Computer
1. Connect the network cable to the camera and then turn on the camera’s
power.