Filter
Top Products
20
of objects in the area expected to view, areas desired to see become dark and
invisible. Therefore, this function is essential.
Picture
Figure 4-12 Picture
Picture Flip
Set image to be upside or down. Select “ON” or “OFF” to activate or deactivate
the flip function.
Picture Mirror
Set image to be left or right. Select “ON” or “OFF” to activate or deactivate the
mirror function.
Note
Please click the “Save” button to save your settings. You can also
click the left button “Reset to Default” to set all the data and
options as defaults.
Compression
Ÿ Select Compression.
Ÿ Configure the options as described in the table below.
Ÿ Click Save.
Ÿ Dual streams: Both Encoder No.1 & No.2 are available for selection.
Ÿ Functions of MJPEG, MPEG-4 and H.264 are effective. The video signal
sent to the Web-Client from the camera has a number of settings that can be
edited which affects the video as it’s displayed in the Web-Client. The
Compression Settings view enables you to configure settings such as
Resolution, Frame Rate and Picture Quality. Besides, the network camera
supports dual streams (for display and storage), should be configured
separately.