Filter
Top Products
5
Adjusting the Camera Position
The dome camera has three axes for positioning the camera. While monitoring the picture on the
monitor, adjust the camera position as follows:
• Pan Adjustment (A) For Wall Mount and Tilted Ceilings Rotate the lens base
(maximum360° ) until you are satisfied with the field of view.
• Horizontal Rotation (B) Rotate 3D assembly in the base. Do not turn assembly more than
360° as this assembly may cause the internal cables to twist and disconnect or break.
• Tilt Adjustment (C) After loosening the thumbnuts, position the camera as desired, then
finger –tighten the thumbnuts to set the position.
Caution
Do not turn the lens more than 360° as this may cause internal cables to
disconnect or break.
Caution
Retighten the locking screws to prevent loss of adjustment.