Filter
Top Products
7
l 4S Electrical junction box(Optional)
1. Secure the mounting kit (optional) to 4S Electrical box using 2 appropriate
screws.
2. Then secure the camera case to mounting kit using 2 appropriate screws.
3. Tuck the cables in the 4S Electrical box.
4. Adjust the view angle (zoom, focus, and Horizontal Rotation).
5. Attach the camera housing.
6. Turn the power on after you have installed the camera.
Note
Depending on the material of your mounting surface, you may require different
screws and anchors than those supplied.
Note
If tilt angle is less than 20 degrees from the horizontal, the image can flash by
reflection of IR-LED light. Keeping tilt angle over 20 degrees is recommended
when IR-LED light is used.
This mounting kit
is optional
accessory.