Filter
Top Products
28
UNLOADING THE FILM
Automatic rewind
The camera automatically rewinds the
film into the cassette after the last
picture is taken.
1. Wait for the camera motor to stop to
ensure that the film is completely
rewound into the film cassette.
• The LCD PANEL (15) displays
“FILM
REWINDING”
and the FRAME
COUNTER
(24) counts down to “0.”
• When the film is fully rewound,
the LCD panel indicates
“REMOVE FILM.”
2. Turn the camera upside down and
slide the FILM-DOOR LATCH (23) to open
the FILM DOOR (20).
3. Remove the film cassette from the
camera and reload with new KODAK
ADVANTIX Film.
• The Film Status Indicator (FSI) on
the film cassette is at ✖ and the LCD
panel displays “
E
.”
Mid-roll change (MRC)
You can remove your film in mid-roll and
later reload it and continue picture-
taking. The Film Status Indicator (FSI) on
a partially exposed film cassette is set
to ◗ (#2 position). When you reload the
film cassette into the camera,
“
SEARCHING
” appears on the LCD
panel. The camera automatically
advances the film to the first unexposed
frame and “
FRESH FILM
” appears on
the LCD panel. Film can be rewound and
reloaded until the last picture is taken.
The camera automatically rewinds the
film and sets the FSI to ✖ (#3 position)
when the last picture is taken.
1. Open the CONTROL-PANEL COVER (18)
located below the LCD PANEL (15).
2. Gently press the MID-ROLL-CHANGE
BUTTON
(38) with the control-button
activator on the camera strap to start
the auto-film rewind.
SELECT
TITLE
PRINT
DATE ENTER