Filter
Top Products
30
TROUBLESHOOTING
What happened Probable cause Solution
Camera will There are no more Remove the film and replace
not operate pictures remaining with new film
Battery weak, dead, missing, Replace or reload
or improperly loaded the battery
Film does not Battery weak, dead, missing, Replace or reload
advance or rewind or improperly loaded the battery
LCD
panel is blank Battery weak, dead, missing, Replace or reload
or improperly loaded the battery
Camera in sleep mode Press almost any of the
control buttons to awaken
the camera
LCD
panel displays:
“BATTERY LOW”
Battery weak Replace the battery
“REPLACE BATTERY”
Battery weak, dead, missing, Replace or reload
or improperly loaded the battery
“FLASH NOT READY”
Flash not fully charged Wait until the
“FLASH
NOT READY”
message
disappears or until the
flash-ready lamp glows green
Flash/camera ready Flash not Wait for lamp to
lamp “blinks” red fully charged glow green
Flash/camera ready Subject closer See Flash-to-subject
lamp glows red than 2.0 ft (0.6 m) distance
on page 16