Filter
Top Products
34
Chapter 6
Connecting With the EASYSHARE Camera Dock
1 Install the Dock insert. Place the front tabs
of the insert into the slots in the EASYSHARE
Camera Dock cavity. Fit the insert down into
the cavity and snap the insert into place.
2 Open the connection door on the bottom of
the camera.
3 Place the camera in the EASYSHARE Camera
Dock.
4 Push the Connect button.
You can transfer files while the green
light is blinking.
For more information, see page 39.
Transferring Your Pictures
KODAK Picture Transfer Software automatically opens when you have
connected as shown in the previous section (Connecting to Your Computer on
page33).
Transferring on a WINDOWS-based Computer
m Click Transfer Now to transfer your pictures to the computer.
m Your pictures are transferred to the following default location on your
computer: C:\Kodak Pictures.
m If you wish to change the default location, Click Setup before you
click Transfer Now.
Connect button