Filter
Top Products
41
Chapter 7
Installing the Battery Pack in the Camera
1 Open the battery door on the side of the
camera.
2 Install the Battery Pack as illustrated.
3 Close the battery door.
CAUTION:
The Battery Pack may only be inserted into the camera in
the orientation shown. If the Battery Pack does not easily
install, reposition it and try again. DO NOT FORCE IT.
Doing so can damage the camera.
NOTE: The batteries in the Battery Pack are not charged. See page42 for
charging instructions.
Docking the Camera
When you are ready to transfer pictures from the camera to the computer, or
charge the Battery Pack, connect the camera to the EASYSHARE Camera Dock
by placing (docking) the camera in the Dock.
1 Turn the camera off.
2 On the camera bottom, slide the Dock
Connection Door until it opens.