Filter
Top Products
8 www.kodak.com/go/support
Taking pictures/videos
Using optical zoom
Use optical zoom to get up to 12X closer to your subject. You can change optical
zoom before (but not during) video recording.
1 Use the EVF or LCD to frame your subject.
2 Press Telephoto (T) to zoom in. Press Wide Angle
(W) to zoom out.
The zoom indicator shows zoom status.
3 Take the picture or video.
NOTE: To get a focused picture every time, remember:
■ Always use the auto focus framing marks,
page 6.
■ If you are using no zoom (1X, wide angle), you
can be as close as 24 in. (60 cm) to your
subject. (For Close-up/Macro mode, see
page 10).
■ As you zoom in (up to 12X), you need to move
further from your subject.
Using digital zoom
Use digital zoom in any Still mode to get up to 4.2X magnification beyond optical
zoom. To turn on/off digital zoom, or change how it is accessed,
see page 32.
1 Press the Telephoto (T) button past the optical zoom limit (12X).
The zoom indicator shows zoom status.
2 Take the picture or video.
NOTE: You cannot use digital zoom for video recording. You may notice decreased image quality when
using digital zoom. The blue slider on the zoom indicator pauses and turns red when the picture
quality reaches the limit for an acceptable 4 x 6-in. (10 x 15 cm) print.
Zoom indicator
WT
D
Digital
zoom
range
Optical
zoom
range