Filter
Top Products
26
Unloading the Film
Within a few seconds after the
last picture is taken, the film
automatically starts to rewind.
The Picture Counter (27) on the
LCD Panel (3) blinks “0” when the
film is finished rewinding. Wait for
the camera motor to stop before
you open the film door and
remove the film. Reload the
camera with fresh Kodak film.
Using the Rewind Button
If you don’t want to take pictures
on the entire roll of film, you can
automatically rewind the film by
pressing the Rewind Button (5).
ON/OFF
( )
MODE