Filter
Top Products
11
Chapter 2
2 Tak in g P ic tu re s
Taking a Picture
1 Slide the Mode selector to Capture and
turn the camera on.
2 Frame your subject using the viewfinder, or
turn Preview on (see page 12) and use the
LCD.
3 Press the Shutter button halfway down to set
the exposure.
4 Press the Shutter button completely down to
take the picture.
The ready light blinks green while the
picture is being saved.
The ready light blinks orange and green
when the flash is recharging. If necessary,
wait for the flash to charge before taking
the next picture.
CAUTION:
Do not insert or remove an MMC/SD card when the ready
light is blinking. Doing so may damage your pictures,
MMC/SD card, or camera.
Shutter button
Mode Selector