3
Chapter 1
Attaching the Wrist Strap
Thread the strap as shown.
Loading the Battery
A KODAK Lithium Battery, KCRV3 (or equivalent) is included.*
1 Open the battery door.
2 Insert the battery as shown.
3 Close the battery door.
NOTE: If the battery is removed after the Date/
Time are set (page 27), the camera will
retain the setting for approximately 10
minutes.
See page 62 for the types of batteries you can use in your camera. For
acceptable battery life and to make sure your camera operates dependably,
do not use alkaline batteries.
NOTE: * AA lithium batteries may be provided. If your camera was packaged
with a KODAK EASYSHARE Camera Dock, the KODAK Ni-MH
Rechargeable Battery Pack is provided. For details on charging and
loading the Battery Pack, see page 42.