Filter
Top Products
www.kodak.com/go/support 45
7 Troubleshooting
Troubleshooting
Camera problems
Status Solution
Camera does not
turn on/off or function
■ Make sure the battery is charged and installed correctly (see
page 1).
LCD is too dark. ■ Adjust the LCD Brightness setting in the Settings menu (see
page 40).
Short battery life ■ Make sure the battery is charged (see page 1).
■ Limit the time you review pictures/videos on the camera LCD.
■ Purchase a spare battery at www.kodak.com/go/accessories.
Flash does not fire ■ The flash does not fire in all modes. Change modes as needed
(see page 13).
Memory card is almost
or entirely full
■ Transfer the pictures to the computer (see page 42).
■ Delete pictures from the card (see page 21) or insert a new card.
You cannot take a
picture
■ Turn the camera off, then on again.
■ Depress the Shutter button all the way (see page 7).
■ Insert a new/charged battery (see page 1).
■ Memory is full. Transfer pictures to the computer (see page 42),
delete pictures (see page 21), or insert another card.
Pictures remaining
number does not
decrease after taking a
picture
■ Continue taking pictures. The camera is operating normally.
(The camera estimates the number of pictures remaining after each
picture is taken, based on picture size and content.)