Kodak NC2000e Digital Camera User Manual


 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reference — Camera 7-39
The camera acts
erratically, unusual or
unexpected characters
appear on the camera
back LCD, or the LCD
flickers unexpectedly.
The battery in the
camera back is low or
dead.
Recharge the battery in the
camera back.
If the unusual behavior
continues for over five
minutes the battery may
need to be replaced by
Kodak.
Contact Kodak.
The firmware in the
camera has become
corrupted.
Update camera firmware, as
described in Chapter 8.
You are experiencing
erratic camera behavior or
unusual characters appear
on the camera back LCD.
You know the battery is
charged.
The firmware in the
camera has become
corrupted.
Update camera firmware as
described in Chapter 8.
The camera is stuck in
one mode for unknown
reasons.
An unexplained event
may have occurred.
Update camera firmware as
described in Chapter 8.
The camera system is warm
when the camera is
connected to the AC
battery charger/adapter.
A warm temperature is
normal.
Continue to operate the camera
normally.
Trouble Possible Cause Suggested Solution
Blinks when
battery is
exhausted