Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preparing the Camera and the Computer 4-43
1. Click the camera control icon of the driver image window. You see
the C
AMERA CONTROL dialog box.
2. IMPORTANT: As you complete this step, keep in mind that this
operation will erase all existing data on the PCMCIA card.
Click the F
ORMAT button, and click the response you want on the
confirmation box that appears.
3. Wait as the software formats the card. (If the operation fails, try
formatting one more time.)
4. If you have more than one card to format, you can remove the current
card as described earlier in this chapter, insert another, and click the
FORMAT button again to format the new card. You can also use this
operation to reformat a card that you have been using with the
camera.
1.
2.