Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reference — Camera 7-49
Wiping the Imager
1. Examine the imager visually. If there is lint on the imager (but not
grease, fingerprints, or other dirt), continue at step 9; otherwise
continue with the next step.
2. Dampen one corner of the web cleaning pad sparingly with the
cleaning solution.
3. Wrap the damp corner of the cleaner pad over the forefinger of one
hand.
4. Hold the camera back firmly in place on the flat surface with your
other hand.
5. Gently scrub the imager with the damp corner of the cleaner pad; use
a circular motion, and move over the entire imager. This action
should dislodge dirt and/or remove grease and fingerprints.