Filter
Top Products
6
ATTACHING THE STRAP
1. Insert the shorter
looped end of the
strap behind the
STRAP POST (7).
2. Thread the longer
end of the strap
through the
shorter loop.
3. Pull the strap tight.
LOADING THE BATTERY
This camera uses one 3-volt lithium KODAK
KCR2 (or equivalent) Battery that supplies
power for all camera operations.
1. Open the BATTERY
DOOR (18).
• Before you remove
the old battery,
close the lens
cover/flash.
2. Insert the battery into
the chamber as shown.
3. Snap the battery door closed.
• After you load a new battery into the
camera, you will need to reset the date
and time.
Low-battery indicator
It’s time to replace the battery when—
• the BATTERY SYMBOL (26) “blinks”
on the
LCD PANEL (10)
or
• none of the indicators, except for a
“blinking” battery symbol, appears on the
LCD panel and the SHUTTER BUTTON (1)
cannot be released.