Filter
Top Products
50 www.kodak.com/go/support
Appendix
Speaker—Mono
PICTBRIDGE support—Yes
Power—(4) AA alkaline or Ni-MH rechargeable batteries; 5V 1.5A DC required if an
AC adapter is used
Tripod mount—1/4 inch
Size—117.7 x 80.8 x 78.7 mm (4.6 x 3.2 x 3.1 in.) @ power off
Weight—Camera, alkaline batteries, and SD card: 473g (16.7 oz)
Camera, Ni-MH batteries, and SD card: 493g (17.4 oz)
Operating temperature—0–40
° C (32–104° F)
Care and maintenance
■ If you suspect water has gotten inside the camera, remove the batteries and card.
Allow all components to air-dry for at least 24 hours before using the camera.
■ Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft,
lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions
unless designed specifically for camera lenses. Do not allow chemicals, such as
suntan lotion, to contact painted surfaces.
■ Service agreements may be available in your country. Contact a dealer of KODAK
Products for more information.
■ For digital camera disposal or recycling information, contact your local authorities.
In the US, go to the Electronics Industry Alliance site at www.eiae.org or go to
www.kodak.com/go/support.
Upgrading your software and firmware
We occasionally update KODAK Software and firmware (the software that runs on the
camera). For instructions on installing the latest version, go to
www.kodak.com/go/Z5010downloads.