Filter
Top Products
Taking pictures/videos
www.kodak.com/go/support
11
Using the self-timer
Use the self-timer when you want to be included in a picture, or to ensure a steady
Shutter button press. Place the camera on a tripod or flat surface.
1 Repeatedly press the Self-timer/Burst button to choose a self-timer setting:
10 seconds— A picture is taken after a 10-second delay (so you have time
to get into the scene).
2 seconds— A picture is taken after a 2-second delay (for a steady, shutter
release on a tripod).
2 shot— The first picture is taken after a 10-second delay. A second picture
is taken 8 seconds later.
2 Compose the scene. Press the Shutter button halfway, then completely down.
The camera takes the picture/pictures after the delay.
Use the same procedure to take a 2- or 10-second self-timer video, but press the
Shutter button completely down.
Using burst
Use the same procedure as above to use the burst feature.
NOTE: The camera stops taking pictures when you release the Shutter button, when the pictures are taken,
or when there is no more storage space. Burst is unavailable in some modes.
Mode Icon Description Purpose
First
Burst
Camera takes up to 3 pictures
while the Shutter button is
pressed.
Capture an expected event.
Example:
A person swinging a golf club.
Last
Burst
Camera takes up to 30 pictures
while the Shutter button is
pressed. When it’s released, the
last 3 pictures are saved.
Capture an event when the precise
timing is uncertain.
Example:
A child blowing out candles.
10
2
2x