Filter
Top Products
Getting help
www.kodak.com/go/support
47
Camera/computer communications
Camera freezes up
when a card is
inserted or
removed.
■ Turn the camera off, then back on. Make sure the camera is turned off
before inserting or removing a card.
Memory card full.
■ Insert a new card (page 4), transfer pictures to the computer
(page 37), or delete pictures (page 18).
Memory card and
internal memory
full.
■ Transfer pictures to the computer (page 37), then format the card or
internal memory (see page 35).
Caution: Formatting a card deletes all pictures and videos,
including protected files.
The Reset Camera
feature did not
take effect.
■ After using the Reset Camera feature (see page 35), turn the camera
off and then on again.
Pictures taken on a
tripod are blurry.
■ Occasionally, a tripod interferes with the camera’s image stabilizer. In
the Setup menu, set Image Stabilizer to Off (see page 34).
Pictures that have
KODAK PERFECT
TOUCH
Technology
applied (twice) are
of lower image
quality.
■ If PERFECT TOUCH Technology has been applied to a picture on the
camera, do not apply it again when the picture is on the computer (or
on a KODAK Picture Kiosk).
NOTE: PERFECT TOUCH Technology is automatically applied to Pictures taken
in Smart Capture mode.
If Try one or more of the following
Cannot transfer pictures.
(The Add New Hardware Wizard
cannot locate drivers.)
■ Disconnect USB cable. Close all open applications.
Re-install the software (page 36).
■ Disconnect the USB cable. Close all open applications.
Re-install the software (page 36).
If Try one or more of the following