Filter
Top Products
44
RECORDING MODE
LCD brightness
The brightness of the LCD monitor can be set in eleven
levels. After selecting the LCD brightness option and
pressing the enter button on the menu (p. 28, 54), the LCD
brightness screen will be displayed. Pressing and holding
the display button will also active the LCD brightness
screen.
Use the left and right keys (1) to adjust the brightness
level; the monitor image will change accordingly. To set the
level, press the enter button (2); the camera will return to
the recording or playback mode. The LCD brightness level
will affect both modes.
12
Auto-power-off menu settings
To conserve battery power, the camera will shut down if an operation is not made within a certain
period. To restore power, press the main switch. The length of the auto-power-off period can be
changed in the setup 1 section of the recording and playback-mode menu (p. 28, 54): 1, 3, 5, 10,
and 30 minutes. The length of the auto-power-off period is fixed at 10 minutes when the camera is
connected to a computer.
Audio signals
The camera’s audio signals can be turned off and on in the setup 1 section of the recording and
playback-mode menu (p. 28, 54).
Enter
Low
High