Filter
Top Products
70
DATA-TRANSFER MODE
Connecting to Mac OS 8.6
To access this camera with a computer with Mac OS 8.6, the USB storage support 1.3.5.smi must be
installed first. This software is supplied by Apple Computer, Inc. free of charge. It can be downloaded
from the Apple web site at http://www.apple.com.
To download and install this software, follow the instruction
on the Apple web site. Always read the attached terms and
conditions before installing any new software.
Auto power off - data-transfer mode
If the camera does not receive a read or write command within thirty minutes, it will shut down to
save power. When the camera shuts down, an unsafe-removal-of-device warning may appear on the
computer monitor. Click “OK.” Neither the camera or computer will be damaged in this operation.
Unplug the USB cable and turn off the camera. Remake the USB connection by reattaching the
cable and turning the camera on.
DirectX 3.0 or later recommended
QuickTime system requirements
IBM PC / AT Compatible
Pentium-based computer
Windows 95, 98, 98SE, NT, Me,
or 2000 Professional.
32MB or more of RAM
QuickTime 5.0 is used for viewing movie clips
and playing audio files. To install QuickTime,
follow the instructions in the installer. Macintosh
users can download the latest version of
QuickTime free of charge from the Apple
Computer web site: http://www.apple.com.
Sound Blaster or compatible sound card