Filter
Top Products
64
DATA-TRANSFER MODE
DATA-TRANSFER MODE
Users with Windows 98 or 98 second edition will need to install the driver software on the included
DiMAGE software CD-ROM (p. 67). Users with Mac OS 8.6 will need to download and install a USB
mass-storage device from the Apple web site (p. 70).
Customers who have bought a DiMAGE 7, 5, S304, or 2330 digital camera and have installed the
Windows 98 driver software must repeat the installation procedure. The updated version of the driver
software included on the supplied DiMAGE software CD-ROM is required for the operation of the
DiMAGE X with a computer. The new software will have no affect on the performance of the DiMAGE
7, 5, S304, or 2330.
Read this section carefully before connecting the camera to a computer. Details on using and
installing the DiMAGE Image Viewer Utility software are found in the supplied software manual. The
DiMAGE manuals do not cover the basic operation of computers or their operating systems; please
refer to the manual supplied with your computer.
IBM PC / AT Compatible
Macintosh
Windows 98, 98SE, Me, 2000
Professional, and XP.
Mac OS 8.6 ~ 9.2.1 and Mac OS X 10.1
For the camera to be connected directly to the computer and used as a mass-storage device, the
computer must be equipped with a USB port as a standard interface. The computer and the
operating system must be guaranteed by their manufacturers to support USB interface. The following
operating systems are compatible with the camera:
DiMAGE X system requirements