Filter
Top Products
18
G
ETTING UP AND RUNNING
Use the left and right keys to select the item to
be changed.
Use the up and down keys to adjust the item.
Press the central button to set the clock and
calendar.
SETTING THE DATE AND TIME
After initially inserting batteries, the camera’s clock
and calendar must be set. When images are
recorded, the image data is saved with the date and
time of recording.
If the clock and calendar have not been set, a
message is displayed for a few seconds each time
the camera is turned on. This message is also
displayed if the clock and calendar are reset when
the camera is stored without batteries for a long
period.
Date/Time setup screen
MM / DD / YYYY
00 : 00
Date/Time set
:enter
2005 . 01 . 01
Set date/time?
NoYes
Use the left and right keys of the controller (1)
to select “Yes.” “No” cancels the operation.
Press the center of the controller to open the
date/time setup screen.
The date/time setup screen can be opened in section 2 of
the setup menu.
:sel.:move
1
DiMAGE_Z20_English_B412.qxd 04.12.27 16:51 Page 18