Filter
Top Products
28
B
ASIC RECORDING
Pressing the information (i
+
) button changes the monitor display. The display cycles
among the standard display, real-time histogram, and live image only.
Standard display Live image only
Information button
i
+
BUTTON
ADJUSTING MONITOR BRIGHTNESS
Set LCD brightness
:adjust
:enter
Low High
The monitor image can be made lighter or
darker. The brightness level can be set
individually for viewfinder and direct viewing.
Turn the mode switch to the appropriate
position. Press and hold the information (i
+
)
button to open the LCD brightness screen.
Use the left/right keys of the controller to adjust
the brightness; the monitor image changes
accordingly. Press the center of the controller or
the menu button to set the brightness level.
The real-time histogram shows the approximate
luminance distribution of the live image. This
histogram cannot show the affect of flash illumination.
The histogram of a recorded image may not show the
same distribution as the real-time histogram.
Real-time histogram
DiMAGE_Z20_English_B412.qxd 04.12.27 16:52 Page 28