Filter
Top Products
53
AUTO DSP
Automatic Digital Subject Program Selection can be
temporarily disabled in the auto-recording menu. When
disabled, the program exposure mode is active. If the camera
is turned off, Automatic Digital Subject Program Selection is
activated.
Drive mode
Image size
Quality
Auto DSP
Digital zoom
Single
2560x1920
Standard
On
Off
DIGITAL ZOOM
The digital zoom is activated in the auto-recording, Digital Subject Program, and section
3 of the P, A, S, and M exposure-mode menus (p. 44).
The digital zoom extends the power of the telephoto position of the optical zoom by up
to 4X in 0.1X increments. The transition between the optical zoom and digital zoom is
seamless. When the digital zoom is active, the image magnification is displayed on the
monitor and the focus frames change to a single focus area. Because of the degree of
magnification, the use of a tripod is recommended.
The digital zoom is operated by the
zoom lever (1). Press the right (T)
side of the lever to zoom in to the
telephoto position of the lens. When
the digital zoom activates, the image
magnification will be displayed on the
monitor. Press the left (W) side of the
lever to zoom out. After zooming, the
zoom scale is displayed briefly. The
yellow section indicates the digital-
zoom range.
Digital-zoom images are interpolated
to the set image size. Some loss of
quality may be evident.
Magnification
Zoom scale
1
DiMAGE_Z20_English_B412.qxd 04.12.27 16:52 Page 53