Konica Minolta DYNAM40 Film Camera User Manual


 
33
The maximum frame rate with continuous advance is 1.7 frames per
second with a shutter speed of 1/250 or faster, no flash, single-shot
AF or manual focus, fresh batteries and no date imprinting. AF
Zoom xi and Power Zoom lenses cannot be zoomed when taking
pictures with continuous advance.
The frame rate is affected by the shutter speed and use of flash.
The built-in flash must recharge between exposures. When using
an accessory flash, the camera continues to take pictures
regardless if the flash has charged.
SELF-TIMER NOTES
When the shutter-release button is pressed partway down, focus
and exposure are locked for the picture; confirm focus lock with the
viewfinder focus signal (p. 23). Do not stand directly in front of the
camera when pressing the shutter-release button. To change the
focus point, release the shutter button and then press it partway
down again.
CONTINUOUS-ADVANCE NOTES
Press the shutter-release button
all the way down to start the
timer. The self-timer indicator on
the data panel blinks and the
flash fires four times before the
shutter releases.
To cancel the self-timer countdown, change the position of the
function dial. The self-timer drive mode is canceled after the picture
is taken. Attach the eyepiece cap if a bright light source is behind
the camera (p. 35).