Konica Minolta DYNAM40 Film Camera User Manual


 
61
If you have questions about your camera, contact your local
camera dealer or write to the Konica Minolta distributor in your
area.
Before shipping your camera for repair, please contact an
authorized Konica Minolta service facility for instructions.
QUESTIONS AND SERVICE
If the camera or lens barrel is dirty, wipe it gently with a soft, clean,
dry cloth. If the camera or lens comes in contact with sand, gently
blow away loose particles - wiping may scratch the surface.
To clean the lens surface, first brush away any dust or sand then
gently wipe the lens with a cloth or tissue designed for optics. Use
lens cleaning fluid if necessary.
Never place lens fluid directly on the lens.
Never touch the interior of the camera, especially the shutter and
mirror, doing so may impair their alignment and movement.
Dust on the mirror will not affect the exposure but may affect the
focus. Use a blower brush to remove dust from or around the
mirror.
Never use compressed air to clean the camera’s interior; it may
damage sensitive internal components.
Never use organic solvents to clean the camera.
Never touch the lens surface with your fingers.
CLEANING
Check the camera’s operation carefully, or take test photographs
before an event or journey.
Konica Minolta is not responsible for any loss that may occur due
to an equipment malfunction.
BEFORE IMPORTANT EVENTS