Filter
Top Products
67
ADDITIONAL FEATURES
ATTACHING THE EYEPIECE CAP
Attach the eyepiece cap if there is a bright light source behind the camera. The eye-
piece cap prevents exposure problems caused by stray light from entering the eye-
piece.
• The self-timer mode will automatically cancel after the exposure is made.
• Do not press the shutter-release button while standing in front of the camera.
• If you want to take a picture with your subject outside of the focus frame, use focus
hold. See page 44.
• To stop the countdown, press the DRIVE button while turning the Front dial once. To
cancel the self-timer before the shutter releases, turn the main switch to switch the
camera off or press the program-reset button.
Press the shutter-release button
all-the-way down to start the
timer.The self-timer lamp on the
front of the camera will blink,
then glow just before the shutter
releases.
5
Remove the eyepiece cup.
1
Slide the eyepiece cap on.
2