70
ADDITIONAL FEATURES
When your subject is not centered in the focus frame, use manual focus or focus hold.
FOCUS HOLD IN REMOTE CONTROL MODE
• The focus remains set after photography is complete. It is cleared by any operation
of the camera (eg pressing a button).
• Photography is also possible using manual focusing.
Center your subject in the focus
frame, then press the shutter-release
button partway down.
2
Release the shutter button when
the focus signal in the
viewfinder is lit (i.e. focus has
been adjusted).
• The focus icon is extinguished when
the shutter button is released,
however the focus remains set.
3
Set the camera to the remote-
control mode.
1
Recompose the picture.
4
Point the remote toward the front
of the camera and press the • or
2s button.
5