Filter
Top Products
69
ADDITIONAL FEATURES
• If the • button is pressed, the lamp on the front of the camera will blink once and
take the picture.
• If the 2s button is pressed, the lamp on the front of the camera will blink for two
seconds before the picture is taken.
• To cancel, reset the drive-mode, press the program-reset button, or turn the camera
off.
Remote emitter
2s Button
Button
Arrange the camera and subject
positions, and compose your pic-
ture.
4
Point the remote emitter toward
the front of the camera and press
the • or 2s button.
5