80
FLASH
PC TERMINAL
This camera is equipped with a PC connector which enables you to connect PC-capa-
ble flash units with a flash sync cord.
• Your camera’s PC terminal is compatible with both center-positive and center-
negative flash units.
• Flash units with an extremely low trigger voltage may not work with the camera. If
your flash has a low trigger voltage, contact a Minolta Service Facility.
Set the exposure mode to M, then
set the shutter to 1/125 or slower.
Manually set white balance to the
flash mode (see page 58).
• Turn the flash unit off before
connecting the sync cord to the PC
terminal or the flash unit may fire
unexpectedly while connecting.