Filter
Top Products
20 GETTING UP AND RUNNING
Installing and removing a memory card
An SD (Secure Digital) Memory card or MultiMediaCard must be inserted for the camera to operate.
If a card has not been inserted, a no-card warning will appear on the LCD monitor; the shutter can
still be released and a single image can be captured (p. 62).
Always turn off the camera and confirm the indicator lamp is not
orange and blinking before changing the memory card, otherwise the
card may be damaged, and data lost.
Slide the battery-chamber door toward the front of the
camera to release the safety catch (1). Open the door.
Insert the memory card all the way into the card slot
and then release (2). The card should catch in the slot.
Insert the card so the face is toward the front of the
camera. Always push the card in straight, never at an
angle. Never force the card. If the card does not fit,
check that it is orientated correctly. If a
MultiMediaCard is inserted incorrectly, it will lock, but
the card chamber door will not close.
To eject a memory card, press the card into the slot
and release (3). The card can now be pulled out.
Close the battery-chamber door and slide it toward
the back of the camera to engage the safety catch (4).
2
3
4
1