Filter
Top Products
21
The response time during recording and playback is longer with MultiMediaCards compared with
SD Memory Cards. This is not a defect, but rather due to the specifications of the cards. When
using large capacity cards, some operations like deletion may take longer.
The SD Memory Card has a write-protect switch to prevent image data from being deleted. By
sliding the switch to the bottom of the card, the data will be
protected. However, when the card is protected, images
cannot be recorded. If an attempt is made to record or delete
an image with the camera, the card-locked message will
appear and the LED lamps near the viewfinder will turn red and
blink quickly. For memory card care and storage see page 128.
If the unable-to-use-card message appears, the inserted card
in the camera may need to be formatted. A card used in
another camera may also have to be formatted before being
used. A card can be formatted in section 1 of the setup menu
(p. 91). When a card is formatted, all the data on the card is
permanently erased.
About memory cards
Write-
protect
switch
Lock
position