Filter
Top Products
Wireless Receiver
9
Wireless Receiver
1. Wireless Antenna: Connects to the back of
the receiver.
2. Channel LEDs: When lit in green, indicates
the active viewing mode.
3. VGA/QVGA* button: Press to switch
between VGA and QVGA video resolutions;
press and hold for several seconds to
remove/replace channels from Auto-Scan.
See page 14 for more details.
4. Front LED: Lit in green to indicate power to
the receiver.
5. Pair: Press to switch between CH1~4, Quad
split-screen mode, and Auto-Scan viewing
mode; press and hold to add (pair) a camera
to the receiver.
Rear Panel
6. Port: Not used.
7. Antenna jack: Connection for the wireless antenna.
Figure 1.1 Wireless receiver – rear
1
2
3 4
5
Figure 1.0 Wireless receiver – front
6
7
*VGA (Video Graphics Array) has a resolution of
640X480; QVGA (Quarter Video Graphics
Array) has a resolution of 320X240.
VGA
/
QVGA
Pair