Marantz PMD620MKII Camcorder User Manual


  Open as PDF
of 96
 
53
Save Settings
Save Settings saves all of the preset values onto the SD card. To
set the saved files onto the PMD620MK
II
, perform Load Settings.
1.
From Stop, press and hold the DISPLAY button for one
second.
2.
Press the VOL + or VOL – button to select “Utility”.
Then press the 1/3/ENTER button to accept.
3.
Press the VOL + or VOL – button to select “Save Settings”.
4.
Press the 1/3/ENTER button. “Save?” message is displayed.
• PresstheSTOP/CANCEL button to cancel saving item and
return to Stop mode.
5.
While “Save?” message is displayed, select “Yes” and press
1/3/ENTER button to output preset value in text format into
the file in a route folder on card. The title of the file output
is “620preset2.txt”. During preset output, “Executing...” is
displayed. After the file output is completed, “Completed” is
displayed for one second and returns to Stop mode.
Card Check
The “Card Check” checks the writing performance of the SD
card being used and displays the results, as shown below.
Display Description
Good Recording is possible without problems.
Poor
Writing problems may occur during recording.
It is recommended you use a different SD card.
Notes:
•DonotturnthepowerofforopentheSDcardcompartment’slidwhile
thecardisbeingchecked.Doingsocoulddamagethecardordata.
Also,itisrecommendedyouusetheACadapterwhencheckingthecard.
•Thecheckresultsareforreferencepurposesonly;theydonotguarantee
operation.
 previous next