Filter
Top Products
4
POWER SOURCE
AC CONNECTION
Insert the small end of the AC adapter into
the DC 5V IN jack (located on the bottom of
this unit). Connect the other end to a wall
outlet having 120VAC, 60 Hz.
AC Adapter, DC 5V Z
NOTES:
• Remove both the DC plug and the AC-
IN plug to disconnect the AC adapter
when not in use, because this unit will
always be ON when the DC plug and theAC-IN plug are connected.
• Only use the suppliedAC adapter which has the following specs: DC 5V Z
USING THE STAND
STAND (REAR OF UNIT)
To use the stand, place the stand’s knob into the hole in the back of the
frame. Push the stand either to the left (for a vertical display) or to the
right (for a horizontal display) until the stand locks into place.