Filter
Top Products
A flash exposure correction value should be
set either on the camera OR on the mecablitz
(44 MZ-2, 54 MZ-... and 70 MZ-...). We do not
recommend the setting of a correction value
on both the camera and the mecablitz.
Do not forget to delete the setting of a manual flash
exposure correction after shooting!
5.4.1 Manual exposure correction on the
camera (FLASH LEVEL)
A manual flash exposure correction (FLASH LEVEL)
can be set in the camera’s menu. For the setting
procedure please refer to the operating instruc-
tions for the given camera.
• Correction setting HIGH = positive correction
value; approx. +1/2 f-stop
• Correction setting LOW = negative correction
value; approx.. -1/2 f-stop
• NORMAL setting = no flash exposure correction
will be made.
mecablitz 70 MZ-...,
54 MZ-..., 50 MZ-5,
44 MZ-2
and 40
MZ-... :
Manual flash exposure correction is supported in
the TTL flash mode and the auto flash mode A of
the mecablitz.
mecablitz 45 CL-4,
32 MZ-3,
32 Z-2:
Manual flash exposure correction is only supported
in the TTL flash mode of the mecablitz.
mecablitz 60 CT
-4:
Manual flash exposure correction is not supported.
☞
16
705 47 0025.A2-GB,I,E 13.11.2006 9:50 Uhr Seite 16