Filter
Top Products
sible towards the camera body to clamp the adap-
ter in position.
2.3 Connecting the mecablitz to the camera
The mecablitz and the camera must be swit-
ched off before connecting or disconnecting
the mecablitz or SCA adapter to/from the
camera (e.g. when inserting or pulling out the
adapter plug).
The mecablitz is mounted on the camera’s acces-
sory shoe together with the SCA adapter. Push the
plug of the adapter’s connecting cable completely
into the „ACC“ accessory socket provided on the
camera.
Supplement to safety notes for SCA 3602
Sony DSC-F707, -F717, -F828:
If a heavy flash unit is mounted on the came-
ra’s accessory shoe, the camera must be held
by the lens - risk of tilting !
3. Operating modes
3.1 Flash modes of the mecablitz
For operation of the mecablitz 45 CL-4 and 60
CT-4, the SCA 3000C converter cable (available
as an optional extra) is additionally required.
When using the mecablitz 32 Z-2, 32 MZ-3, 45
CL-4 and 60 CT-4, a fixed CCD sensitivity (ISO)
must be selected on the camera. Avoid using
the AUTO setting.
3.1.1 Auto flash mode A
The sensor integrated into the mecablitz controls
the output of light.
Switch the mecablitz to auto flash mode A. Set
☞
☞
☞
☞
8
705 47 0025.A2-GB,I,E 13.11.2006 9:50 Uhr Seite 8