Filter
Top Products
99
6.3 Events Tab
On the Events tab, an application can be specified to be started automatically by “Scanner
events” such as “pushing buttons on the scanner”.
(The Events tab is not displayed if the device does not support this function.)
♦ Select an event
Select a “scanner event” from the list box to start an application.
Please select the item to set up from the following events.
"Start button" or "Scan button":
When pushing the "Start" or the "Scan" button on the scanner.
"Send to1-9": When pushing the "Send To" button of the scanner.
(* “Scanner events” may not be displayed depending on scanners.)
♦ Actions
Select an action when the event selected [Select an event] occurs.
- Start this program:
The application selected from the right list box starts when the event occurs.
- Prompt for which program to run
The window for selecting application appears when the event occurs.
- Take no action
Nothing starts even if the event occurs.
If these functions are not used, mark on this check box.