Microsoft 10.2 Photo Scanner User Manual


 
31
4.5 Specifying Driver Operation
[Preview]
Scans in a preliminary image based on set values, and displays the image in the preview
window.
Before actual scanning, the preview function can be used to display the entire document for
specifying the desired scan area.
In case of the scanner with Flatbed basically, the preview function is available only when a
document is scanned with the Flatbed. The scanner without Flatbed scans the first page of a
document on the ADF (the front side only in case of duplex scanning).
Some models do not support this function. See "Relevant Image Scanner Specification".
[Scan]
Scans the specified scan range based on set values.
The following "progress indicator" is displayed during scanning to show the progress of the
scan operation. To stop scanning, click the [Cancel] button.
The character string indicates the data transfer mode used between the driver and the
application.
There are three types of “Xfer Modes (transfer modes)” which vary depending on the
application in use: Native mode, Memory mode and File mode.
Some models display skew of the document being scanned in the “Information:” column.
Progress indicator
[Close] / [OK]
Closes the dialog box without scanning.
If a setting is changed, the changed setting is saved in the initial value file.