Filter
Top Products
6766
3. Press the mode button.
• The data panel returns to the original
display.
• When the setting other than the
default setting is selected in custom
3, 4 or 5, remains on the data
display.
• After changing the wireless flash channel (see 1. Wireless channel
setting), fit the flash to the camera, and press the shutter-release but-
ton partway down to transmit the flash channel information to the cam-
era.
• When ‘All modes’ is selected (see 5. Exposure modes in which manu-
al flash and multiple flash may be set) manual flash and multiple flash
photography may be used in all exposure modes. The setting is pro-
vided for the sake of convenience, however the proper exposure may
not be obtained with photography in other than the M mode, and it is
therefore recommended that the M mode be used.
• The selected settings are maintained even when the flash unit is
switched off, or the battery is removed.
CUSTOM FUNCTION
1. Wireless channel setting
Channel 1 Channel 2
2. Flash range units (m/ft)
4. Time to auto power off when using wireless
60 minutes none
Channel 3 Channel 4
3. Time to auto power off
4 minutes 15 minutes 60 minutes none
Select with the select button
Select with the + button or – button
5.
Exposure modes in which manual flash and multiple flash may be set
M mode only All modes
CUSTOM FUNCTION
m ft