Filter
Top Products
48
49A
DVANCED RECORDING
SETTING THE FUNCTION DIAL
The memory function, metering mode, exposure mode, drive mode, white balance, and
camera sensitivity are controlled by the function dial. Making changes with the function
dial is simple. The function dial can only be used for still photography.
Turn the function dial to the mode to be changed (1).
While pressing the button in the center
of the function dial, turn the control dial
near the shutter-release button to
change the mode (2). Release the
function button to set the mode.
Changes are displayed on the monitors
and data panel.
ISO
WB
DRIVE
P
ASM
MEM
Memory - to store and recall camera settings (p. 50).
Metering modes - changes the metering pattern (p. 51).
Exposure modes - changes the method of exposure control (p. 52).
Drive modes - changes the method of image capture (p. 58).
White balance - changes between automatic, preset, and custom
white balance (p. 67).
ISO - changes camera sensitivity (p. 70).
Dial
MEM
PASM
DRIVE
WB
ISO
Display
P
A
S
100, 200,
400, 800.
Setting
Memory registers or the setting
function are selected with a spe-
cial menu displayed on the mon-
itors.
Multi-segment
Center weighted
Spot
Program
Aperture priority
Shutter priority
Manual
Single-frame advance
Continuous advance
Self-timer
Interval
Bracketing
Automatic white balance
Daylight
Tungsten
Fluorescent 1 and 2
Cloudy
Custom setting 1 through 3
Custom calibration
Automatic gain
Preset camera sensitivity in ISO
equivalents.
Page
50
51
53
54
55
56
58
62
60
61
64
68
68
68
70
EVF & Monitor Display
Menu
ISO value
is displayed
(No display when set)
1
2
UHS continuous advance
59
No data panel
display.
66
High-speed continuous advance
(No display when set)
M
Display for the
data panel, EVF
and LCD monitor
are the same
unless indicated.