Filter
Top Products
:enter:size
12 FROM ANNOTATION TO MAILING
Press the center of the controller to select the area. The audio stand-by screen is
displayed.
In the stand-by screen, press the shutter-release button to begin recording.
The frame counter displays the elapsed time; during the last ten seconds,
the counter will turn red and count down the time. The recording stops
when the shutter-release button is pressed again or the remaining time has
elapsed.
The annotation screen with the selected main image is dis-
played with a red area marquee. The subsequent audio track
is linked to the area in the marquee.
Pressing the display button switches the marquee between
the entire and local image areas.
Annotation screen
When making audio recordings, be careful not to touch or cover
the microphone. For best results, hold the camera approximately
20cm (8in) from your mouth.
Use the left/right and up/down keys of the con-
troller to move the area marquee.
To exit the audio-annotation mode, press the center of the controller for one second. To return to the
main-image selection screen, press the menu button.
Press shutter button to
record.
:enter:size
The main image is displayed again. The yellow marquee indicates the previ-
ous marquee position. The red marquee is for the next linked audio track.
Repeat the procedure to record subsequent tracks. The audio files are
stored in WAV format on the memory card, but they do not appear in the
main-image selection screen.
Recording audio.
Press shutter button to stop.
:enter:size