Filter
Top Products
Connect the camera to the computer. Insert the small plug of
the USB cable into the camera, and attach the other end of
the USB cable to the computer’s USB port. Make sure the
plugs are firmly attached. If “initializing USB connection” mes-
sage does not disappear from the LCD monitor, the cable may have not been attached properly.
Start up the computer.
Insert the memory card containing the files into the camera (p.
5).
14 FROM ANNOTATION TO MAILING
Creating .mdm files from camera images
An annotation series captured by the camera can be converted automatically by the DiMAGE Biz
Software to an .mdm annotation file. See the DiMAGE Biz Software manual for installation instruc-
tions.
DiMAGE Biz Software - System Requirements, 5. Before installing the software, 5.
Installation, 6-8. Starting up, 9.
DiMAGE Xt - Connecting the camera to a computer, 84-85. Disconnecting the camera from a
computer, 92-93.
Select the DiMAGE Biz Software from the
DiMAGE Biz Software folder in the pro-
grams option of the start menu to start the
application and open the main window. If
the software was
installed in a dif-
ferent location,
open it from
there.
Manual reference page
Main window