Filter
Top Products
21
ATTACHING AND REMOVING THE LENS
20
AA
FF
/M/M
8080
5656
1. Remove the body cap.
Attaching the Lens
3. Align the red mounting
dots on the lens and
camera body.
4. Gently insert the lens into
the mount, then turn
clockwise until it clicks
into the locked position.
• Do not insert the lens at an angle.
• Do not press the lens release when attaching the lens.
Removing the Lens
1. Press the lens release
and turn the lens counter-
clockwise until it stops.
2. Gently remove the lens
from the mount and
replace the caps, or
attach another lens.
Caution
• Do not force the lens if it does not turn smoothly.
• Do not touch the inside of the camera, especially the lens
contacts and mirror.
• Remove dust and dirt from the lens mount before attaching or
removing a lens.
2. Remove the rear lens cap.
Lens Hood Note
Attach a lens hood (page 74) to reduce flare and ensure
maximum image quality. Flare reduces the contrast of the
final image.
2102 OM E 16/10/97 11:27 AM Page 20