Filter
Top Products
Remote Operation Software (DX-PC For View)
37
Time-Lapse Search
Click the button on the Search View panel to enter the time-lapse search mode. Selecting a date from
the calendar initiates the time-lapse search. The dates for which recorded images are available are enabled.
When first entering the time-lapse search, the latest date with recorded images will be selected (highlighted)
in the calendar. Click the
(Reload) button to reload the date information. Recorded information available
from the selected date will be displayed on the timetable. The recorded data are displayed by time and
bar-shaped segments indicate there are recorded data during that time. Select a specific hour by clicking
the mouse on the desired hour segment.
The recorded data of each camera channel are displayed by time in one-minute segments and a red vertical
line indicates the selected time that will be played back. The color of the bar indicates different types of
recording: Yellow for Pre-event, Purple for Event, Red for Panic, and Blue for Time-lapse. If the DVR has
more than one video segment in the same time range, each segment will be separated by a yellow vertical line.
To view an image from a specific time, click the (Go To) button and set up the date and time to search.
Event Search
Click the
button on the Search View panel to enter the event search mode. First, click the button,
and set up the search condition in the following Event Search dialog box.