Filter
Top Products
14 NS380 / NS380W User Guide
YML826 Rev1 - Pan/Tilt Internet Camera
Web Configuration Utility
You can access and manage the Pan/Tilt Internet Camera through: 1) a web browser, and 2) the
enclosed software IPView Pro. This chapter describes the Web Configuration Utility, and provides
the instructions on using the camera with a web browser.
Accessing the Camera with the Web Configuration Utility
The Pan/Tilt Internet Camera must be configured through its built-in Web-based Configuration.
From the web browser, enter the default IP address to access the Welcome screen of the Pan/Tilt
Internet Camera. To configure your Pan/Tilt Internet Camera, type http://192.168.0.20 in the
address box. The number is the default IP address of your Pan/Tilt Internet Camera. Then, press
[Enter].
NOTE: The computer’s IP address must correspond with the camera’s IP
address in the same segment for the two devices to communicate.
For example, you can change the IP address of your PC to
192.168.0.10 in order to access the camera.
Welcome Screen of the Configuration Utility
After the default IP address is entered from the browser, the Pan/Tilt Internet Camera Welcome
screen will appear with a still image. There will be three options to choose from to set-up and view
your Pan/Tilt Internet Camera, including:
• View Video – ActiveX Mode
• View Video – Java Mode
• System Administration