Filter
Top Products
15
Preparations
E
3.
Pull the film leader out to the red index mark.
If the film leader is inserted farther than the red index mark or the end of
the film leader is folded, the film may not be wounded up properly.
Hold the film cartridge and ensure film is properly positioned with no
slack.
4.
Close the camera back, and check that the film
has been correctly loaded.
Lite Touch Zoom 140ED Lite Touch Zoom 140ED QD
Once the camera back is closed, the film automatically advances to the
first frame. Until film loading is complete, “
” blinks on the LCD
panel.
When the film has been properly set, “ ” is displayed on the LCD panel.
If the letter “ ” blinks on the LCD panel, film is not properly loaded.
Open the camera back again and reload film.