Filter
Top Products
Advanced Operations
37
E
2.
Compose the picture, then lightly press the
Shutter Release button.
3.
Check that the orange and green LEDs light up,
then shoot.
While the orange LED is blinking with the Shutter Release button
pressed lightly, the flash is being charged, and the shutter cannot be
released. Lightly press the Shutter Release button again, and release
the shutter after the orange LED stops blinking and stays lit.
The Red-eye Reduction mode is not automatically canceled by turning
the power off. To cancel the Red-eye Reduction mode, press the
button until “ ” disappears from the LCD panel.
About Red-eye Reduction mode
This mode is not recommended when shooting fast-moving subjects.
Because the shutter actually releases approximately one second after
pressing the Shutter Release button to light up the subject by the Red-
eye Reduction lamp.